Converters and Repeaters

• Input: RS-232 protocol
• Output: RS-485/RS-422 protocol
• Speed: 300~115200 BPS
• Isolation voltage: 3000 VDC
• Input power: 12 VDC ~ 24 VDC
• Power consumption: 2.2 W max.
• Repeater request: 4,000 feet or over 256 modules
• Model: I-7520

We are engaged in offering our clients a superior quality range of RS232 To RS485/RS422 Converters.

Features:

• Output: RS-485/RS-422 protocol
• Speed: “Self Tuner” inside, auto switching baud rate
• 256 modules max. in one RS-485 network without repeater
• 2048 modules max. in one RS-485 network with repeater
• I-7520R model is used for PLC user. The design of isolation between I-7520 and I-7520R is different If the user wants to supply the power from PLC, he should use the I-7520R. Otherwise, the isolation will be broken. For Supply from PC side Use I 7520.

• Transmission rate: 115.2 Kb/s
• Compatibility: USB 1.1 standard
• Output: RS-232/422/485 protocol
• Power consumption: 1.5 W max.
• Mounting: Din-rail, wall mounting, piggyback stack
• Communication distance: 2.1 Km/9600 Bps, 2.7 Km/4800 Bps, 3.6 Km/2400 Bps
• Repeater request: 4,000 feet or over 256 modules
• Isolation voltage: 3000 VDC
• Signals: TXD, RXD, GND, RS-422, RX+, RX-, TX+, TX-, RS-485, DATA+, DATA
• Input port: USB
• Output port: 3-wire RS-232, RS-422, RS-485, RS-232

The USB To RS232/422/485 Converters is a cost-effective module for transfer serial data over USB. It allows you to connect your serial devices to systems using a USB interface. Connecting the I-7561 to a PC, you get one or two extra high-speed RS-232/422/485 ports. Like our I-7520A, the I-7561 contains "Self Tuner". This chip auto-tunes the baud rate and data format to the Rs-485 network. The I-7561 module derives the power from the USB port and doesn’t need any power adapter. It also supports various O.S. independent RS-232/422/485 ports.

Features:
• Full compatibility with USB 1.1
• 256 modules max. in one RS-485 network without repeater
• 2048 modules max. in one RS-485 network with repeater
• Plug-and-play installation
• Driver Supported: Windows 98/ME/2000/XP “Self Tuner” inside, support multiple Baud Rate and multiple Data Format
• Mounting: Din-rail, wall mounting, piggyback stack
• Windows 98/ME/2000/XP drivers supported

• Output: RS-232, RS 422, RS-485 protocol
• Input: RS-232, RS 422, RS 485 protocol
• Speed: 300~115200 BPS
• Product type: Repeater and Isolator
• Power Input: 10 ~ + 30 VDC
• Operating Temperature: -25 degree C ~ + 75 degree C

Our offered product RS485 /RS 422 Repeaters & RS232 Isolators change one type of signal (typically RS-232 or USB) into another more robust or more transportable signal (typically RS-422, RS-485 or Ethernet). RS-422 communication links are used where distance, electrical noise or lack of speed would make RS-232 unsuitable. RS-485 has all the advantages of RS-422 as well as multi-dropping and half-duplex operation. Use of a Serial to Ethernet converter allows extra COM ports to be added remotely to a PC via a network.

Features :
• Self Tuner inside, auto switching baud rate
• Power consumption: I 7510/ I 7510AR model is used for PLC user. The design of isolation between Any RS 232, RS 422 & RS 485 Network. If the user wants to supply the power from PLC, he should use the I 75XXR. Otherwise, the isolation will be broken. For Supply from PC side, Use I 75XX.

• Minimum Order Quantity: 1 pcs
• Base TX Ethernet: 10/100
• Incorporates: Any RS-232/422/485
• upports Modbus: TCP master and slave
• Contains: 32-bit MCU
• Colour: White

We are one of the leading manufacturer and supplier of Tiny Modbus TCP to Modbus RTU TGW-700. We obligated to meet the quality standards as per the customer demand.

• Usage/Application: Industrial
• Model Name/Number: I-7188E3
• Number Of Ports/Pins: 1 x Ethernet, 1 x RS-232, 1 x RS-422, 1 x RS-485
• Built in: MiniOS7
• LED display: 7 segment
• Program download port: COM1 or Ethernet Port
• Support one: RS-232 port and one RS-485 port
• compatible Ethernet Controller: 10BASE-T NE2000

Introduction:
The I-7188EN series is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/422/485 devices to an Ethernet network. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the I-7188EN series into standard COM ports on a computer. By virtue of its protocol independence, a small-core OS and high flexibility, the I-7188EN series is able to meet the demands of every network-enabled application.
The I-7188EN series includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in high-performance MiniOS7 boots the I-7188EN up in just one second and gives you the fastest responses.
The I-7188E3(D) is equipped with 1 RS-232 port, 1 RS-422 port and 1 RS-485 port. The removable on-board terminal block connector is designed for easy and robust wiring in industrial situations.

Features

• Incorporates any RS-232/422/485 serial device in Ethernet
• Data transmission via Virtual COM or raw TCP connection
• VxComm Driver for 32-bit and 64-bit Windows 7 SP1/10/2012/2016
• Built-in High-Performance MiniOS7 from ICP DAS
• Watchdog Timer suitable for use in harsh environments
• Palm-Sized with multiple Serial Ports
• Power Reverse Polarity Protection

• Network Type: Converter
• Compatible Brand: icpdas
• Number Of Ports: 3 ports
• Switching Baud Rate: 300~115200 bps
• Power Input: 10 ~ 30 VDC
• Isolation Protection: 3000 VDC
• Transmission Speed: Up to 115200 bps
• Operating Temperature: -25 degree C ~ +75 degree C

Our firm is involved in manufacturing and supplying a huge range of Converters, Repeater.

Features:

• Isolation Protection on the RS-485 side
• ESD Protection for the RS-232/422/485 Data Line
• DIN-Rail

• Minimum Order Quantity: 1 pcs
• Base TX Ethernet: 10/100
• Incorporates: Any RS-232/422/485
• Supports: TCP,UDP,HTTP,DHCP,BOOTP and TFTP protocols
• Colour: White
• Raw TCP connection VxComm Driver: 32-bit and 64-bit Windows
• Model: Tds-700

We are one of the leading manufacturer and supplier of Tiny Device Server TDS-700. We obligated to meet the quality standards as per the customer demand.

• Minimum Order Quantity: 1 pcs
• Base TX Ethernet: 10/100
• Incorporates: Any RS-232/422/485
• Colour: White
• Raw TCP connection VxComm Driver: 32-bit and 64-bit Windows
• Supports: TCP,UDP,HTTP,DHCP,BOOTP and TFTP protocols

We are one of the leading manufacturer and supplier of Tiny Serial Port Sharer TSH-700. We obligated to meet the quality standards as per the customer demand.

• Minimum Order Quantity: 1 pcs
• Base TX Ethernet: 10/100
• Incorporates: Any RS-232/422/485
• Colour: White
• Supports: TCP,UDP,HTTP,DHCP,BOOTP and TFTP protocols
• Raw TCP connection VxComm Driver: 32-bit and 64-bit Windows

We are one of the leading manufacturer and supplier of Tiny Modbus TGW-718. We obligated to meet the quality standards as per the customer demand.

• Minimum Order Quantity: 1 pcs
• Base TX Ethernet: 10/100
• Incorporates: Any RS-232/422/485
• Colour: White
• Supports: TCP,UDP,HTTP,DHCP,BOOTP and TFTP protocols
• Raw TCP connection VxComm Drivers: 32-bit and 64-bit Window

We are one of the leading manufacturer and supplier of TINY DEVICE SERVER TDS-718. We obligated to meet the quality standards as per the customer demand.

• Minimum Order Quantity: 1 pcs
• Colour: White
• Raw TCP connection VxComm Driver: 32-bit and 64-bit Windows
• Supports: TCP,UDP,HTTP,DHCP,BOOTP and TFTP protocols
• Base TX Ethernet: 10/100
• Incorporates: Any RS-232/422/485

We are one of the leading manufacturer and supplier of Tiny Device Server TDS-712. We obligated to meet the quality standards as per the customer demand.

• Application: Factory Automation, Building Automation, Home Automation
• Model Name/Number: I-7188EX
• Number of Ports/Pins: 14 pins
• Cable length: 100-meter
• Connector: RJ-45
• Mass storage: 2 megabytes to 64 megabytes
• Display type: 7-segment LED display

Compared to I-7188EX, the I-7188EA adds seven open-collector output channels and six digital Input channels. I/O Expansion bus has been occupied by DI/O expansion board. Therefore I-7188EA is used as an Embedded Internet / Ethernet Controller with several built-in D I/O channels. If the user want to know more detail of I-7188EX, refer to I-7188EX for further information. 

Features:

AMD 80188-40 embedded CPU or compatible

Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP

10BASE-T NE2000 compatible Ethernet Controller

Reloadable Operating Software

Remote Configuration

Diagnostics

64-bit hardware unique serial number inside

COM driver support interrupt & 1K QUEUE Input & Output buffer

COM port: COM1, COM2

Built-in RTC, NVRAM, EEPROM

User defined 14 I/O lines

Built-in I/O expansion bus interface

Can add on one expansion board only

Built-in self-tuner ASIC controller on RS-485 port

7-segment LED display for I-7188EXD

Built-in MiniOS7

Program download port: COM1 or Ethernet Port

• Minimum Order Quantity: 1 Piece
• compatible Ethernet Controller: 10BASE-T NE2000
• Built in: MiniOS7
• Support one: RS-232 port and one RS-485 port
• Program download port: COM1 or Ethernet Port
• Built in self tuner: ASIC controller on RS-485 port

We are one of the leading manufacturer and supplier of Internet Communication Controller i-7188e2d. We obligated to meet the quality standards as per the customer demand.

• Minimum Order Quantity: 1 pcs
• operating temperatures between: 25 to 75 degree
• Sample rate: Max. 10 Hz
• Power supply: 10 to 30 V DC

We are one of the leading manufacturer and supplier of Internet Communication Controller I-7188e2d. We obligated to meet the quality standards as per the customer demand.

• Minimum Order Quantity: 1 Piece
• Color: Grey
• Number of Ports: 1 port Fiber Optic ,4 port 10/100M RJ-45 connector
• Area Network Type: LAN Capable
• Data Rate (Mbps): 10/100Mbps
• LED Indicator: Required
• Power Consumption: 2.0 W max.
• Input Voltage: +10 ~ +30 VDC
• I Deal In: New Only
• Brand: icpdas
• Fiber Port: ST (Multi-mode)
• Dimensions: 64 x 118 x 101 (W x L x H)
• Power requirements: 0.14 A @ 24 VDC
• ESD Protection: 4KV
• Wavelength: 1300 or 1310nm
• Fiber Cable: 62.5/125 m
• Speed: 300 ~ 115200 bps
• Transmission Distance: 2 km, (62.5/125 um recommended) for full duplex
• Isolation voltage: +10 ~ +30VDC (Non-isolation)

The NS-205FC is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NS-205FC provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

Features:

• Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
• Each port supports both 10/100 Mbps speed auto negotiation
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• Automatic MDI/MDI-X crossover for plug-and-play
• Store-and-forward architecture
• Supports operating temperatures from 0 ~ +70 °

• Minimum Order Quantity: 1 Piece
• Brand: Nimbus
• Width: 52 mm
• Height: 90 mm
• Depth: 27 mm
• Temperature: -25C to 75 C
• Input DC voltage: 12 V to 48 V

Introduction:
The tDS-700 is a series of Serial-to-Ethernet device servers that are designed to add Ethernet and Internet connectivity to any RS-232 and RS-422/485 device, and to eliminate the cable length limitation of legacy serial communications. By using the VxComm Driver/Utility, the built-in COM Port of the tDS-700 series can be virtualized to a standard PC COM Port in Windows. Therefore, users can transparently access or monitor serial devices over the Internet/Ethernet without the need for software modification.
tDS-700 device servers can be used to create a pair-connection application (as well as serial-bridge or serial-tunnel), and then route data between two serial devices via TCP/IP. This is useful when connecting mainframe computers, servers or other serial devices that do not themselves have Ethernet capability. By virtue of its protocol independence and flexibility, the tDS-700 meets the demands of virtually any network-enabled application. 
In harsh industrial environments, the tDS-700 series (for i version) also adds 3000 VDC and +/- 4 kV ESD protection component that diverts the potentially damaging charge away from sensitive circuit to protects the module and equipment from the sudden and momentary electric current. To achieve maximum space savings, the tDS-700 is offered in an amazingly small form-factor that enables it to be easily installed anywhere, even directly attached to a serial device or embedded into a machine. The tDS-700 features a powerful 32-bit MCU that allows it to efficiently handle network traffic. The tDS-700 offers true IEEE 802.3af-compliant (classification, Class 1) Power-over-Ethernet (PoE) functionality using a standard category 5 Ethernet cable that allows it to receive power from a PoE switch such as the NS-205PSE. If there is no PoE switch available on site, the tDS-700 can accepts power input from a DC adapter.

Features

• Incorporates any RS-232/422/485 serial device in Ethernet
• Data transmission via Virtual COM or raw TCP connection
• VxComm Driver for 32- and 64-bit Windows 7 SP1/10/2012/2016
• Max. connections : 1 socket per serial port is suggested
• Supports pair-connection (serial-bridge, serial-tunnel) applications
• Supports TCP client-mode and TCP server-mode operations
• Supports UDP responder for device discovery (UDP Search)
• Static IP or DHCP network configuration
• Easy firmware update via the Ethernet (BOOTP, TFTP)
• Tiny Web server for configuration (HTTP)
• Contains a 32-bit MCU that efficiently handles network traffic
• 10/100 Base-TX Ethernet, RJ-45 x 1 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
• Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
• Allows automatic RS-485 direction control
• Terminal block connector for easy wiring
• Tiny form-factor and low power consumption
• RoHS compliant & no Halogen
• Cost-effective device servers

Additional Information:

• Item Code: TDS-718
• Delivery Time: 2~3 weeks

Serial to Ethernet Converters
Additional Information:

• Minimum Order Quantity: 1 pcs
• Item Code: I-7561